FOXX EXTEND PLUS SYNTHETIC METALWORKING FLUID 20L PAIL

• FOXX Extend Plus is a unique, low pH synthetic fluid.
• EXCELLENT LUBRICITY.Provides excellent tool life and surface finish.
• EXCELLENT CLEANLINESS and RANCIDITY CONTROL.Rejects tramp oil to keep product clean, which extends sump life.
• OPERATOR – FRIENDLY.Provides excellent part visibility - A fresh mix is transparent - No Smoke - Low misting - Mild to the skin.
• EXCELLENT FOAM CONTROL.Very low foaming product, even when used with de-ionized water.

Can be used for heavy to severe grinding and machining (including deep hole drilling and roll form tapping on aluminium and some steels).

Suitable for use on many grades of aluminium alloys including surface stain resistance, carbon and stainless steels, titanium and other exotic alloys (excluding magnesium alloys). Low misting and foaming, excellent rancidity control and high tramp oil rejection.

Typical Properties of FOXX Extend Plus

RECOMMENDED STARTING DILUTIONS

FOXX Extend Plus is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55F (13 C). Add no other materials to the concentrate or mix unless approved by your FOXX District Manager.

CONCENTRATION

BCG Titration, Total Alkalinity, CIMCHEK™ Test Strip or Refractometer can be used.

The Refractometer Factor is 1.6. Multiply the scale reading obtained on your FOXX Refractometer by this factor to obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with water before testing the sample mix. Remove gross contaminants from the sample mixes before testing. A refractometer is only recommended for use in checking concentration on a fresh charge.

HANDLING AND STORAGE

If frozen, product separates. Thaw completely at room temperature and stir thoroughly before use. Inside storage is recommended.