HOLEMAKER 2'' DEPTH MAXI-CUT TCT ANNULAR CUTTERS IMPERIAL
As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate.
These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths.
The tungsten carbide cutting teeth can also be sharpened and replaced.
Depth of Cut: 2"
Pilot Pin Diameter: 6.34mm
Shank Diameter: 3/4" (19.05mm)
6.34mm Pilot Pin to suit - Part# SP16004
HOLEMAKER 2" DEPTH MAXI-CUT ANNULAR CUTTER SELECTION CHART
| Part No. |
Diameter-inch |
Diameter-mm |
Depth Of Cut |
Pilot Pin Diameter |
Shank Diameter |
| MAX50I-5/8 |
5/8" |
15.87mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-3/4 |
3/4" |
19.05mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-7/8 |
7/8" |
22.22mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-1 |
1" |
25.40mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-1-1/8 |
1-1/8" |
28.57mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-1-1/4 |
1-1/4" |
31.75mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-1-5/16 |
1-5/16" |
33.34mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-1-3/8 |
1-3/8" |
34.92mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-1-1/2 |
1-1/2" |
38.10mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-1-5/8 |
1-5/8" |
41.27mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-1-3/4 |
1-3/4" |
44.45mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-1-7/8 |
1-7/8" |
47.62mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-2 |
2" |
50.80mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-2-1/8 |
2-1/8" |
53.97mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-2-1/4 |
2-1/4" |
57.15mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-2-3/8 |
2-3/8" |
60.33mm |
2" |
6.34mm |
3/4" (19.05mm) |
| MAX50I-2-1/2 |
2-1/2" |
63.50mm |
2" |
6.34mm |
3/4" (19.05mm) |