HOLEMAKER 3'' DEPTH MAXI-CUT TCT ANNULAR CUTTERS IMPERIAL

Product Code: HOLANMAXCUT75IMP

          







ex GST
(Each)
Qty Each (inc GST) Each Save %
Stock Availability
Pack Quantity
1
Increase value Decrease value
Description

HOLEMAKER 3'' DEPTH MAXI-CUT TCT ANNULAR CUTTERS (IMPERIAL)


well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate. 

These Tungsten Carbide Tipped Cutters consist of an alloy metal body, and tungsten carbide cutting teeth. Due to this composition, these cutters are less susceptible to breakage than standard high speed steel cutters, especially in larger diameters and longer lengths. 

The tungsten carbide cutting teeth can also be sharpened and replaced.

Depth of Cut: 75mm
Pilot Pin Diameter: 8mm
Shank Diameter: 3/4" (19.05mm)
8mm Pilot Pin to suit - Part # SP18075

HOLEMAKER 3" DEPTH MAXI-CUT ANNULAR CUTTER SELECTION CHART
Part No. Diameter-inch Diameter-mm Depth Of Cut Pilot Pin Diameter Shank Diameter
MAX75I-11/16 11/16" 17.46mm 3" 8mm 3/4" (19.05mm)
MAX75I-3/4 3/4" 19.05mm 3" 8mm 3/4" (19.05mm)
MAX75I-7/8 7/8" 22.22mm 3" 8mm 3/4" (19.05mm)
MAX75I-1 1" 25.40mm 3" 8mm 3/4" (19.05mm)
MAX75I-1-1/8 1-1/8" 28.57mm 3" 8mm 3/4" (19.05mm)
MAX75I-1-1/4 1-1/4" 31.75mm 3" 8mm 3/4" (19.05mm)
MAX75I-1-5/16 1-5/16" 33.34mm 3" 8mm 3/4" (19.05mm)
MAX75I-1-3/8 1-3/8" 34.92mm 3" 8mm 3/4" (19.05mm)
MAX75I-1-1/2 1-1/2" 38.10mm 3" 8mm 3/4" (19.05mm)
MAX75I-1-5/8 1-5/8" 41.27mm 3" 8mm 3/4" (19.05mm)
MAX75I-1-3/4 1-3/4" 44.45mm 3" 8mm 3/4" (19.05mm)
MAX75I-1-7/8 1-7/8" 47.62mm 3" 8mm 3/4" (19.05mm)
MAX75I-2 2" 50.80mm 3" 8mm 3/4" (19.05mm)
Technical Specifications
Brand Holemaker
Products to compare:
Comparing Products

Be the first to hear about it...